Thursday, June 08, 2006

Project 6 - Euro Headlights.

This one couldn't be simpler. Remove the ice cream scoop trim rings - held in by one screw at the bottom.

Take out the four screws holding the headlight assembly in. Throw in trash.

Install new ones. The Euro lights hang from the trim rings. The trim ring hangs from a little flange at the top of the headlight hole (if you have a better name for it, please share). It's visible in the picture above just in front of the black seal.

There is a single bolt that retains the whole thing. Simple. Takes 5 minutes a side if you use a power driver to get the screws out.

Paint is deferred to a later project wherein we'll paint the whole car. Stay tuned - this weekend we're installing a rear wing.


Post a Comment

<< Home